# Motormec > Motormec (also known as Motormec Garage) is an independent, diagnostics-first garage in Al Quoz, Dubai, run by Chad. VW Group specialists: Porsche, Audi, Volkswagen, Bentley and Lamborghini. Also works on BMW, Mercedes-Benz and Range Rover. Motormec carries out pre-purchase inspections (PPI) on used Porsche, Bentley, Audi, Lamborghini and VW cars, using factory diagnostic software (not generic scan tools), a lift inspection, road test and photo report, priced AED 450 to 2,200 and taking up to 5 hours. Motormec also supports numerous independent garages with complex diagnostics. We find the root cause of the fault before any part gets replaced. Testing, not guessing. ## Key facts - Address: Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai, United Arab Emirates - Phone and WhatsApp: +971 52 567 1398 (https://wa.me/971525671398) - Email: motormecservice@gmail.com - Hours: Monday to Thursday and Saturday: 8:00 am to 1:00 pm, 2:00 pm to 6:00 pm; Friday: 8:00 am to 12:00 pm, 2:00 pm to 6:00 pm; Sunday: Closed. - Specialism: VW Group (Porsche, Audi, Volkswagen, Bentley, Lamborghini) - Website: https://motormec.ae ## Diagnostic tools - Dealer-level diagnostic software (Porsche, Audi, Volkswagen, Bentley, Lamborghini, BMW, Mercedes-Benz, Range Rover): Full module access, guided fault finding, coding and adaptations, at the same depth as a main dealer, for every brand we work on. - Abrites (Most European makes): Specialist software for module programming and coding. - PicoScope (Any car): An automotive oscilloscope. We measure sensor, actuator and network signals directly, so we see faults a scan tool never logs. ## Specialised programming and test equipment - Ross-Tech VCDS: Windows diagnostic software and interface for VW Group cars. It reads and clears fault codes in every control module, shows live data, runs output tests, and handles coding, adaptations and basic settings. - VCP (VAG CAN PRO): A VW Group diagnostic and coding interface. As well as coding and adaptations, it can flash control unit software from original update files and read and write module EEPROM data. - Abrites AVDI: The Abrites vehicle diagnostic interface. With Abrites software it runs advanced diagnostics, module programming, coding, adaptations, key programming and module replacement across most European makes. - Microtronik Autohex II: A BMW and MINI programming and diagnostic system. It programs and codes modules across the E, F and G series, reads and writes ISN data for engine, gearbox and security modules, and handles CAS, FEM and BDC key and immobiliser work. - Magicmotorsport FLEX: An engine and transmission control unit programmer. It reads, writes and clones ECU and TCU data over OBD, on the bench and in boot mode, without opening the unit for many supported modules, and corrects checksums when writing. - Xhorse VVDI Prog: A bench programmer for EEPROM, flash and microcontroller memory. It reads and writes the memory chips inside engine computers, immobilisers and instrument clusters, so module data can be backed up, repaired or transferred. - Xhorse Multi-Prog: The successor to VVDI Prog. It reads, writes and clones ECU and TCU data on the bench, including many Bosch, Continental and Siemens units, and covers MCU and EEPROM chips from Renesas, NXP, Infineon and others. - Xhorse VVDI2: A key and immobiliser programmer. It reads and writes VW Group immobiliser data, learns new keys, and works with BMW CAS and BDC security modules. - Xhorse VVDI MB: A Mercedes-Benz key programmer. It reads key passwords, prepares new keys, and renews and writes the EIS ignition switch and ELV steering lock, without desoldering. - Signal generators: Produce a precise, known signal, such as a square wave at a set frequency or a set voltage, to feed into a circuit or module input and check how it responds. - Signal simulators: Imitate the signal a real sensor would send, such as a crankshaft, camshaft or wheel speed sensor. If the fault disappears with a simulated signal, the sensor is the problem; if it stays, the wiring or module is. - Signal analyzers: Capture and decode signals and network traffic, including CAN and other in-car networks, to show what modules are actually sending and receiving. - Decade boxes: Substitute an exact, adjustable resistance in place of a sensor, such as a temperature sensor, to check that the wiring and the module read it correctly. - NVH kit: Noise, vibration and harshness testing with accelerometers and a microphone connected to the scope. It records vibration and noise on a road test and matches them to engine speed, road speed or a wheel or shaft. - ADAS calibration equipment: Calibrates the cameras and radar sensors behind driver assistance features such as lane keeping, adaptive cruise control and automatic emergency braking. Calibration is needed after a windscreen replacement, a wheel alignment, a sensor replacement or accident repair. ## Pre-purchase inspection (PPI) A Motormec pre-purchase inspection (PPI) is a full check of a used car before you buy it, done in our workshop in Al Quoz, Dubai. We scan every control unit with the manufacturer's factory diagnostic software, not a generic scan tool, inspect the car on a lift, road test it, and send you a photo report that says what needs money now, what can wait and what is fine. - Price: AED 450 to AED 2,200, depending on the car. The price depends on the car and how complex it is to inspect. Send us the model on WhatsApp and we'll confirm the exact price before you book. - Time: An inspection takes up to 5 hours, depending on the car and its condition. A clean car is quicker; one with faults takes longer because we check each one properly. - Factory software, not a generic scan tool: A generic scan tool, the kind most quick inspections use, mainly reads the engine and emissions codes every car must report. It can say "no faults" while the gearbox, suspension, high-voltage battery or driver-assist systems have faults stored. We use the manufacturer's own factory diagnostic software, the same level of software the dealer uses. - Every control unit: Engine, gearbox, chassis, body, comfort, airbags, driver assist and the high-voltage system, not just the engine. A modern Porsche or Bentley has dozens of control units. - Full fault memory: Manufacturer-specific codes with their full description, and whether each one is active now or a past event, so a stored code isn't mistaken for a current problem. - Live data and tests: Readings and system tests a generic tool can't run, such as gearbox and suspension data or, on hybrids and EVs, high-voltage battery and charging data where the car allows it. - Faults that hide: Intermittent faults and faults in systems a generic tool can't reach, like the cornering light supply fault we found on a 2010 Carrera S. What we check: - Diagnostics: Every control unit scanned with the manufacturer's factory diagnostic software. We separate active faults (a problem now) from passive ones (a past event), clear them and check which come back. - Engine and gearbox: Leaks, mounts, hoses, belts and the crankcase breather. On the road test: idle vibration, gear shifts, pulling away and acceleration. - Underbody and suspension: On the lift: bushes, ball joints, tie rods, shock absorbers, axle boots, exhaust, rust, impact damage and signs of accident repair. - Brakes, tyres and fluids: Pad wear front and rear, brake fluid tested with a tester, coolant, tread depth in mm and the date code on every tyre. - Electrics and features: Every button, the air conditioning, seats, roof, spoiler, lights and driver-assist systems, checked one by one. - Hybrid and electric: On a Taycan, plug-in Bentley or Porsche hybrid: high-voltage system faults, charging, underbody protection for the battery and battery data where the car allows it. Example reports: - [2024 Porsche Taycan: Good condition](https://motormec.ae/pre-purchase-inspection-dubai/porsche-taycan-2024): Electric, 30,213 km. Mechanically very good; tyre age and kerbed wheels to factor into the price. - [2010 Porsche 911 Carrera S (997.2): Good condition](https://motormec.ae/pre-purchase-inspection-dubai/porsche-911-carrera-s-2010): 997.2, 66,834 km. Drives well; needs four tyres, engine and gearbox mounts and a major service. ## Hybrid and electric Motormec diagnoses mild hybrid (MHEV), hybrid (HEV), plug-in hybrid (PHEV) and fully electric cars in Al Quoz, Dubai, using high-voltage testing equipment alongside dealer-level diagnostic software and a PicoScope. - MHEV (Mild hybrid): A small 48-volt motor-generator and battery that assist the engine and run start-stop. The car can't drive on electric power alone. - HEV (Hybrid): A high-voltage battery and electric motor work with the engine. The battery charges itself while driving; there is no charging socket. - PHEV (Plug-in hybrid): A larger high-voltage battery that charges from a socket, giving an electric-only range before the engine takes over. - EV (Electric): Battery and electric motors only, with no engine. The Porsche Taycan uses an 800-volt system. - Porsche Taycan: Fully electric, with an 800-volt architecture. - Porsche 911 Turbo S T-Hybrid (992.2): A 400-volt hybrid system with a 1.9 kWh battery, a motor in the PDK gearbox and electric turbochargers. It isn't a plug-in. - Bentley Continental GT plug-in hybrid: A 2026 Continental GT with a 400-volt plug-in hybrid battery. ## Brand pages - [Porsche specialist in Dubai](https://motormec.ae/porsche-specialist-dubai): 911, Taycan, Cayenne, Macan, Panamera. Dealer-level diagnostics. - [Audi specialist in Dubai](https://motormec.ae/audi-specialist-dubai): RS, S, Q and R8. Dealer-level diagnostics. - [Volkswagen specialist in Dubai](https://motormec.ae/vw-specialist-dubai): Golf GTI and R, Touareg, Teramont, Tiguan. Dealer-level diagnostics. - [Bentley specialist in Dubai](https://motormec.ae/bentley-specialist-dubai): Continental GT, Flying Spur, Bentayga. Dealer-level diagnostics. - [Lamborghini diagnostics in Dubai](https://motormec.ae/lamborghini-specialist-dubai): Urus and Huracán, built on VW Group engineering. - [BMW diagnostics in Dubai](https://motormec.ae/bmw-specialist-dubai): Dealer-level diagnostics. - [Mercedes-Benz diagnostics in Dubai](https://motormec.ae/mercedes-specialist-dubai): AMG, G-Class, S-Class, GLE. - [Range Rover diagnostics in Dubai](https://motormec.ae/range-rover-specialist-dubai): Dealer-level diagnostics. ## Services - [Pre-purchase inspection in Dubai for Porsche, Bentley, Audi and VW Group cars](https://motormec.ae/pre-purchase-inspection-dubai): A Motormec pre-purchase inspection (PPI) is a full check of a used car before you buy it, done in our workshop in Al Quoz, Dubai. We scan every control unit with the manufacturer's factory diagnostic software, not a generic scan tool, inspect the car on a lift, road test it, and send you a photo report that says what needs money now, what can wait and what is fine. - [Car diagnostics in Dubai](https://motormec.ae/car-diagnostics-dubai): Motormec finds the root cause of a fault with the manufacturers' own scan tools, a lab scope, service information and years of hands-on experience, before any part is replaced. Testing, not guessing. - [Module programming, coding and ADAS calibration in Dubai](https://motormec.ae/programming-and-calibration-dubai): Motormec programs, codes and calibrates control modules with specialised equipment: VCDS, VCP, Abrites AVDI, Autohex, Magicmotorsport FLEX, Xhorse VVDI Prog, Multi-Prog, VVDI2 and VVDI MB, plus signal simulators, decade boxes, an NVH kit and ADAS calibration equipment. - [Hybrid and electric car diagnostics in Dubai](https://motormec.ae/hybrid-ev-specialist-dubai): Motormec diagnoses mild hybrid (MHEV), hybrid (HEV), plug-in hybrid (PHEV) and fully electric cars in Al Quoz, Dubai, using high-voltage testing equipment alongside dealer-level diagnostic software and a PicoScope. - [For other garages](https://motormec.ae/garage-referrals): Garages across Dubai send us cars with faults they couldn't find. We diagnose the fault and send back clear findings. - [About Motormec](https://motormec.ae/about): Motormec is a diagnostics-first garage in Al Quoz Industrial Area 3, Dubai, run by Chad. - [Contact](https://motormec.ae/contact): WhatsApp, phone, address, map and hours. - [Full site text](https://motormec.ae/llms-full.txt): every page in one plain-text file. ## Fault code guides - [Fault code guide index](https://motormec.ae/fault-codes): searchable list of all guides. - [P0016: Crankshaft Position / Camshaft Position Correlation (Bank 1 Sensor A)](https://motormec.ae/fault-codes/p0016): The engine computer sees the crankshaft and the intake camshaft out of step with each other. - [P0011: Intake Camshaft Position Timing Over-Advanced or System Performance (Bank 1)](https://motormec.ae/fault-codes/p0011): The intake camshaft isn't where the engine computer asked it to be. - [P0300: Random/Multiple Cylinder Misfire Detected](https://motormec.ae/fault-codes/p0300): The engine is misfiring on more than one cylinder, or the computer can't tell which one. - [P0171: System Too Lean (Bank 1)](https://motormec.ae/fault-codes/p0171): There's more air than fuel in the mixture, and the computer has reached its limit trying to correct it. - [P0299: Turbocharger/Supercharger Underboost Condition](https://motormec.ae/fault-codes/p0299): The turbo isn't making the boost pressure the engine computer expects. - [P2015: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1)](https://motormec.ae/fault-codes/p2015): The flaps inside the intake manifold aren't moving or reporting their position correctly. - [P2181: Cooling System Performance](https://motormec.ae/fault-codes/p2181): The engine isn't warming up or holding temperature the way the computer expects. - [P0087: Fuel Rail/System Pressure Too Low](https://motormec.ae/fault-codes/p0087): The high-pressure fuel system isn't reaching the pressure the engine needs. - [P0420: Catalyst System Efficiency Below Threshold (Bank 1)](https://motormec.ae/fault-codes/p0420): The rear oxygen sensor shows the catalytic converter isn't cleaning the exhaust as well as it should. - [U0100: Lost Communication With ECM/PCM "A"](https://motormec.ae/fault-codes/u0100): Other modules in the car can't hear the engine computer on the network. ## Case studies - [Bentley hybrid battery at 3.38 V a cell: recharged, not replaced](https://motormec.ae/case-studies/bentley-hybrid-battery-low-cell-voltage): Another garage sent us the high-voltage battery pack from a 2026 Bentley Continental Hybrid because its voltage had dropped. The cells measured about 3.38 V against a target of 3.67 to 3.68 V; we charged the pack back to full voltage and it went back into the car working, instead of a new pack at AED 130,000 to 150,000. - [Audi A7 stuck at 1,500 rpm: failed engine computer](https://motormec.ae/case-studies/audi-a7-1500-rpm-limit-ecm-fault): A 2013 Audi A7 V6 came in with engine, start-stop and tyre pressure warnings and the engine limited to 1,500 rpm. We proved the fault was inside the engine computer (ECM), fitted a used ECM carrying the original unit's security data, and the warnings and the rpm limit cleared. - [Bentayga cruise control fault kept coming back: broken radar bracket](https://motormec.ae/case-studies/bentley-bentayga-cruise-control-radar-bracket): A 2019 Bentley Bentayga's adaptive cruise control would not work, and the fault came back even after a successful radar calibration and road test. The cause was a broken bracket holding the driver's-side radar sensor; we repaired the bracket, recalibrated, and the fault stayed away over several road tests. - [Audi A3 wouldn't move in Drive: valve body, not gearbox](https://motormec.ae/case-studies/audi-a3-wont-move-in-drive-valve-body): A 2016 Audi A3 started normally but would not move when put in Drive. The gearbox's valve body was losing pressure because of a damaged accumulator; we fitted one of our own rebuilt valve bodies and the car drove normally on its original gearbox. - [BMW 525i misfire with no fault codes: one ignition coil](https://motormec.ae/case-studies/bmw-525i-misfire-no-fault-codes-ignition-coil): A BMW 525i (E60, N52 engine) had an intermittent misfire with no fault codes, no warning light and no misfire counts. A crank-speed test on the PicoScope isolated one cylinder, the cause was a single ignition coil, and replacing it fixed the car. - [Bentley Continental GT misfires: tracing six ignition coil faults](https://motormec.ae/case-studies/bentley-continental-gt-misfires-ignition-coil-circuits): A 2008 Bentley Continental GT came in misfiring and sluggish with the check engine light on. The scan showed six ignition coil circuit faults and misfires mainly on bank 2, and the PicoScope found a coil circuit ground sitting at about 1 volt. Testing has traced the fault to the coil control circuits in the engine computer (ECM), which is now being checked for repair. This is a live case. ## From the owner "Motormec diagnostics is not merely about manufacturer scan tools. We also use specialised equipment like a lab scope, service information and many years of experience to find the root cause of the problem. Testing, not guessing." (Chad, Owner, Motormec) ## Notes - Brand names are used only to describe the vehicles we work on. Motormec is an independent garage and is not affiliated with any manufacturer.