S tronic gearbox faults
Jerky pull-away, gear warnings or limp mode. Mechatronic units, clutch adaptations and fluid condition all show up in the data.
Motormec is an independent Audi specialist in Al Quoz, Dubai. We diagnose Audis with dealer-level diagnostic software and confirm faults with a PicoScope before parts get replaced.
WhatsApp or call +971 52 567 1398
Jerky pull-away, gear warnings or limp mode. Mechatronic units, clutch adaptations and fluid condition all show up in the data.
Chain stretch and tensioner problems set cam and crank correlation codes. We measure the actual cam timing instead of guessing.
Water pump and thermostat housings on TFSI engines are a common leak point.
Underboost codes, wastegate actuators, diverter valves, coils and carbon build-up.
Modules dropping out, warnings that come and go, battery drain.
Our dealer-level software reads every Audi module and runs the guided tests and adaptations a main dealer uses. The PicoScope lets us check cam and crank signals, injectors and networks directly when a code alone isn't enough.
You tell us the symptoms, when they happen and what has already been replaced.
We read every module with dealer-level diagnostic software for the make.
The lab scope measures sensors, actuators or network signals, so we see faults a scan tool never logs.
We confirm the cause before any part gets replaced.
Yes. We diagnose and work on RS3, RS4, RS5, RS6, RS7, RSQ8 and R8, along with the rest of the Audi range.
Dealer-level diagnostic software, plus a PicoScope oscilloscope for measuring signals directly.
P0016 means the engine computer sees the crankshaft and camshaft out of step. On 2.0 TFSI engines a stretched timing chain or worn tensioner is a common cause. See our P0016 guide for details.
Message us on WhatsApp on +971 52 567 1398 with the car, the symptoms and anything already replaced.
Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai · Mon–Sat 8:00 am to 6:00 pm, lunch 1 to 2 pm