WhatsApp
Pre-purchase inspection

Pre-purchase inspection in Dubai for Porsche, Bentley, Audi and VW Group cars

A Motormec pre-purchase inspection (PPI) is a full check of a used car before you buy it, done in our workshop in Al Quoz, Dubai. We scan every control unit with the manufacturer's factory diagnostic software, not a generic scan tool, inspect the car on a lift, road test it, and send you a photo report that says what needs money now, what can wait and what is fine.

WhatsApp or call +971 52 567 1398

Before you pay

Know what you're buying

A used Porsche, Bentley or Audi can look perfect and still need thousands of dirhams of work. Worn mounts, cracked bushes, old tyres, stored fault codes and leaks don't show in a listing photo. A PPI tells you before you pay, so you can walk away or use the findings to agree a fair price.

Price and time

450–2,200Price in AED, depending on the car
The price depends on the car and how complex it is to inspect. Send us the model on WhatsApp and we'll confirm the exact price before you book.
Up to 5 hrsInspection time
An inspection takes up to 5 hours, depending on the car and its condition. A clean car is quicker; one with faults takes longer because we check each one properly.
What we check

Scan, lift, road test

01Diagnostics
Every control unit scanned with the manufacturer's factory diagnostic software. We separate active faults (a problem now) from passive ones (a past event), clear them and check which come back.
02Engine and gearbox
Leaks, mounts, hoses, belts and the crankcase breather. On the road test: idle vibration, gear shifts, pulling away and acceleration.
03Underbody and suspension
On the lift: bushes, ball joints, tie rods, shock absorbers, axle boots, exhaust, rust, impact damage and signs of accident repair.
04Brakes, tyres and fluids
Pad wear front and rear, brake fluid tested with a tester, coolant, tread depth in mm and the date code on every tyre.
05Electrics and features
Every button, the air conditioning, seats, roof, spoiler, lights and driver-assist systems, checked one by one.
06Hybrid and electric
On a Taycan, plug-in Bentley or Porsche hybrid: high-voltage system faults, charging, underbody protection for the battery and battery data where the car allows it.
Diagnostics

Factory software, not a generic scan tool

A generic scan tool, the kind most quick inspections use, mainly reads the engine and emissions codes every car must report. It can say "no faults" while the gearbox, suspension, high-voltage battery or driver-assist systems have faults stored. We use the manufacturer's own factory diagnostic software, the same level of software the dealer uses.

01Every control unit
Engine, gearbox, chassis, body, comfort, airbags, driver assist and the high-voltage system, not just the engine. A modern Porsche or Bentley has dozens of control units.
02Full fault memory
Manufacturer-specific codes with their full description, and whether each one is active now or a past event, so a stored code isn't mistaken for a current problem.
03Live data and tests
Readings and system tests a generic tool can't run, such as gearbox and suspension data or, on hybrids and EVs, high-voltage battery and charging data where the car allows it.
04Faults that hide
Intermittent faults and faults in systems a generic tool can't reach, like the cornering light supply fault we found on a 2010 Carrera S.
The report

What you get

01A clear verdict
One paragraph and one status at the top, so you know where the car stands in ten seconds.
02Sorted by urgency
Needed now, recommended, worth knowing, cosmetic, and checked OK. Each finding has a photo, what we found and why it matters.
03Measurements, not opinions
Pad wear in percent, tread in mm, tyre date codes, brake fluid test results and the fault code printout.
04Verifiable
Report number, VIN, odometer reading and the inspector's name, with our address and number on every page. English or Arabic.
VW Group specialists

What we look for, by brand

How it works

Book a PPI

  1. 01

    Send us the car

    Message us on WhatsApp with the listing or the model, year and mileage.

  2. 02

    Book a slot

    You or the seller bring the car to our workshop in Al Quoz Industrial Area 3.

  3. 03

    We inspect it

    Full scan, lift inspection and road test, with photos of everything we find.

  4. 04

    You get the report

    A photo report and PDF on WhatsApp that you can show the seller or keep for your records.

Updated

FAQ

Pre-purchase inspection questions

What is a pre-purchase inspection?

A pre-purchase inspection (PPI) is an independent check of a used car before you buy it. At Motormec it covers a full scan of every control unit with factory diagnostic software, a lift inspection of the underbody, suspension, brakes and tyres, a road test, and a photo report sorted by what needs doing now, what can wait and what is fine.

How much does a pre-purchase inspection cost at Motormec?

A Motormec pre-purchase inspection costs AED 450 to AED 2,200, depending on the car and how complex it is to inspect. Send the model on WhatsApp and we confirm the exact price before you book.

How long does a pre-purchase inspection take?

Up to 5 hours, depending on the car and its condition. A car in good condition is quicker; one with faults takes longer because each one is checked properly.

Do you use a generic scanner or factory software?

Factory software. We scan every control unit with the manufacturer's own diagnostic software, not a generic scan tool. A generic tool mainly reads engine and emissions codes and can miss faults stored in the gearbox, chassis, body, driver-assist and high-voltage systems. Factory software reads every control unit, shows manufacturer-specific codes and whether each is active or a past event, and runs live data and system tests.

Which cars do you inspect?

We specialise in VW Group cars: Porsche (including the Taycan and hybrids), Bentley, Audi, Lamborghini and Volkswagen. We also inspect other European cars. Send us the model on WhatsApp and we will confirm.

What does the report look like?

A verdict and condition status at the top, then every finding with a photo, what we found and why it matters, sorted into needed now, recommended, worth knowing, cosmetic and checked OK. It includes measurements such as pad wear, tread depth and tyre date codes, plus the report number, VIN, odometer and inspector's name. See the example reports on this page.

Can you inspect a Taycan or a plug-in hybrid?

Yes. We work on high-voltage cars, including the Porsche Taycan, Porsche hybrids and Bentley plug-in hybrids, and check the high-voltage and charging systems as part of the inspection.

Can I get the report in Arabic?

Yes. Reports are available in English or Arabic.

How do I book a PPI?

Message Motormec on WhatsApp at +971 52 567 1398 with the car's model, year and mileage or a link to the listing. The workshop is at Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai.

WhatsApp first

Buying a Porsche, Bentley or Audi?

Send us the listing on WhatsApp and we'll book the inspection.

Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai · Mon–Sat 8:00 am to 6:00 pm, lunch 1 to 2 pm