Car diagnostics in Dubai
Motormec finds the root cause of a fault with the manufacturers' own scan tools, a lab scope, service information and years of hands-on experience, before any part is replaced. Testing, not guessing.
WhatsApp or call +971 52 567 1398
Motormec diagnostics is not merely about manufacturer scan tools. We also use specialised equipment like a lab scope, service information and many years of experience to find the root cause of the problem. Testing, not guessing.
Our diagnostic strategy
- 01
Listen
You tell us the symptoms, when they happen and what has already been replaced.
- 02
Scan
We read every module with dealer-level diagnostic software for the make.
- 03
Measure
The lab scope measures sensors, actuators or network signals, so we see faults a scan tool never logs.
- 04
Confirm
We confirm the cause before any part gets replaced.
The scan tool shows a code. The scope gives the real picture.
Faults like a split-second sensor dropout never get stored as a code, but they're obvious on the scope.
Dealer-level diagnostics
Dealer-level diagnostic software for every brand we work on, Abrites for module programming and coding, and a PicoScope automotive oscilloscope.
| Tool | What it does | Makes |
|---|---|---|
| Dealer-level diagnostic software | Full module access, guided fault finding, coding and adaptations, at the same depth as a main dealer, for every brand we work on. | Porsche, Audi, Volkswagen, Bentley, Lamborghini, BMW, Mercedes-Benz, Range Rover |
| Abrites | Specialist software for module programming and coding. | Most European makes |
| PicoScope | An automotive oscilloscope. We measure sensor, actuator and network signals directly, so we see faults a scan tool never logs. | Any car |
Specialised work
Brands we diagnose
Diagnostics questions
What's the difference between a code reader and dealer-level diagnostics?
A generic code reader shows basic engine codes. Dealer-level diagnostic software reads every module in the car and runs the guided tests, coding and adaptations a main dealer uses.
Why use an oscilloscope?
A scan tool shows a code. A PicoScope shows the actual signal. Faults like a split-second sensor dropout never get stored as a code, but they're obvious on the scope.
Can you find intermittent faults?
Yes. We capture intermittent faults with long data logging and PicoScope measurements, so warnings that come and go can be traced to the circuit causing them.
Tell us what the car is doing
Message us on WhatsApp on +971 52 567 1398 with the car, the symptoms and anything already replaced.
Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai · Mon–Sat 8:00 am to 6:00 pm, lunch 1 to 2 pm