WhatsApp
BMW 525i (E60, N52 engine)

BMW 525i misfire with no fault codes: one ignition coil

A BMW 525i (E60, N52 engine) had an intermittent misfire with no fault codes, no warning light and no misfire counts. A crank-speed test on the PicoScope isolated one cylinder, the cause was a single ignition coil, and replacing it fixed the car.

WhatsApp or call +971 52 567 1398

Car
BMW 525i (E60, N52 engine)
Published
Tools
PicoScope

The complaint

A brief, intermittent stumble, the kind of misfire mechanics call a "fishbite". There was no warning light on the dash.

Findings

The scan found no stored fault codes, and the engine's misfire counters were at zero. The car's own diagnostics had not noticed anything.

So we ran a crank-speed test on the PicoScope. Each cylinder that fires properly speeds the crankshaft up, so each one shows as a peak on the trace. One cylinder did not, which isolated the misfire to that cylinder. The fault on it was the ignition coil.

Root cause

A failed ignition coil on the one cylinder the crank-speed test isolated. The engine computer never logged it.

The fix

We replaced the ignition coil on that cylinder.

How we confirmed it

After the new coil was fitted, the car ran smoothly and the misfire was gone.

Outcome

Misfire fixed with one ignition coil, found by measurement rather than by replacing parts until it went away.

FAQ

Questions

What was wrong with the BMW 525i?

A failed ignition coil on the one cylinder the crank-speed test isolated. The engine computer never logged it.

How was the fault fixed?

We replaced the ignition coil on that cylinder.

How was the repair confirmed?

After the new coil was fitted, the car ran smoothly and the misfire was gone.

WhatsApp first

Tell us what the car is doing

Message us on WhatsApp on +971 52 567 1398 with the car, the symptoms and anything already replaced.

Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai · Mon–Sat 8:00 am to 6:00 pm, lunch 1 to 2 pm