WhatsApp
Fault code guide · Audi, VW

P2015: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1)

The flaps inside the intake manifold aren't moving or reporting their position correctly.

WhatsApp or call +971 52 567 1398

Reviewed by Chad, owner of Motormec · Updated

Meaning

What P2015 means

The flaps inside the intake manifold aren't moving or reporting their position correctly.

Makes most affected: Audi, VW

Causes

Common causes on VW Group cars

  1. A worn or broken runner flap linkage
  2. A faulty runner position sensor
  3. A vacuum leak to the flap actuator
  4. Carbon build-up stopping the flaps moving
Diagnosis

How we confirm the cause

We watch the flap position in live data while commanding it, then check the actuator and sensor signal. Sometimes it's a small linkage, not a whole manifold.

Can I keep driving?

Usually drivable. You may notice reduced power or rough running.

Related codes

Related codes

FAQ

P2015 questions

What does P2015 mean?

P2015 is Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 1). The flaps inside the intake manifold aren't moving or reporting their position correctly.

What causes P2015 on VW Group cars?

A worn or broken runner flap linkage. A faulty runner position sensor. A vacuum leak to the flap actuator. Carbon build-up stopping the flaps moving.

Can I keep driving with P2015?

Usually drivable. You may notice reduced power or rough running.

WhatsApp first

Got a P2015?

Message us on WhatsApp on +971 52 567 1398 with the car, the symptoms and anything already replaced.

Warehouse 4, Street 22, Al Quoz Industrial Area 3, Dubai · Mon–Sat 8:00 am to 6:00 pm, lunch 1 to 2 pm